Ipsec Sa Settings (Ipsec Settings) - Konica Minolta bizhub C650 User Manual

Network Settings
4
Touch [Fwd.→].
IKE Settings screen 2/2 appears.
5
Specify the desired settings.
– To change the setting under "Key Validity Period", press the [C] (clear) key, and then use the keypad
to type in the desired value.
– Under "Diffie-Hellman Group", select a group.
6
Touch [OK].
– To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
The IPsec Settings screen appears again.

IPsec SA Settings (IPsec Settings)

A maximum of eight combinations of security protocols and algorithms for IPsec communication can be
stored. Settings can be specified for the following.
Parameter
Lifetime After Establishing
SA
Security Protocol
ESP Encryption Algorithm
ESP Authentication Algo-
rithm
AH Authentication Algo-
rithm
0 In order to apply the IPsec settings, settings must be specified for "IKE Settings", "IPsec SA Settings"
and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
C650
Description
Specify the length of time that the key is valid after being generated when creating
communication tunnels.
Select the security protocol.
If "Security Protocol" was set to "ESP", specify the ESP encryption algorithm.
If "Security Protocol" was set to "ESP", specify the ESP authentication algorithm.
If "Security Protocol" was set to "AH", specify the AH authentication algorithm.
4
4-23