Konica Minolta bizhub C650 User Manual page 148

Specifying Utility mode parameters
!
Detail
To check registered body text, select it, and then touch [Check Job Set.].
To change a registered body text, select it, and then touch [Edit].
To delete a registered body text, select it, and then touch [Delete].
To change the default setting, select a body text, and then touch [Set as Default].
Note
The registration cannot be completed if no setting is specified for "Body".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
C650
3
3-27