Specifying Utility mode parameters
The User Settings screen appears.
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
If user authentication settings have been specified, [Change Password], [Change E-Mail Address] and
[Change Icon] are available when a registered user is logged on.
Displaying the Administrator Settings screen
1
Press the [Utility/Counter] key.
2
Touch [3 Administrator Settings].
–
An item can also be selected by pressing the key in the keypad for the number beside the desired
button. For [3 Administrator Settings], press the [3] key in the keypad.
C650
3
3-5