Sending The Fax After Erasing Shadows (Frame Erase); Frame Erase; Sending A Fax After Setting The Frame Erase - Konica Minolta bizhub C550 User Manual

Useful transmission functions
6.4

Sending the fax after erasing shadows (Frame Erase)

Frame Erase

When the original is scanned while the ADF is open, there may be a black
shadow around the original at the time of scanning the booklet original and
the original may be faxed with that black shadow. Frame Erase function eras-
es the black shadow on Top, Bottom, Right, and Left of original when a
booklet is scanned.
Note
Can be used in both original glass and ADF.
The frame erase quantity can be set within a range of 0.1 - 50 mm (1/16
- 2 inch) with a scale of 0.1 mm (1/16 inch).
Initial Frame Erase value at the time of purchase: 5.0 mm (3/16 inch)
Following functions cannot be used simultaneously.
Long Original

Sending a fax after setting the Frame Erase

1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– For details on loading originals, refer to "Loading the original" on
page 2-13.
3
Touch the buttons in order of [Scan Settings], [Erase].
C550
Ordinary
Frame erasure
transmission
transmission
6
Width of
erasure
6-12