Setting Up Ldap - Konica Minolta bizhub C550 User Manual

Administrator mode

Setting Up LDAP

Item
No.
LDAP Server Name
Server Address
Port Number
Enable SSL
Port Number (SSL)
Search Base
C550
Description
Displays the number of the LDAP server.
Type in the name of the LDAP server.
Type in the address of the LDAP server. (Format: ***.***.***.*** or
FQDN: Range for ***: 0 to 255) The only symbols that can be used
are the dash (-) and period (.). To type in a host name, check the
"Please check to enter host name." check box. If the machine is set
to use IPv6, an IPv6 address can also be specified.
Type in the port number to be used for communication with the
LDAP server. (Range: 1 to 65535)
Select whether or not to use SSL/TLS to communicate with the
LDAP server.
Specify the starting point for LDAP searches (up to 255 characters).
3
3-96