Konica Minolta bizhub C550 User Manual page 73

User mode
Item
Limiting Access to Desti-
nations
Reminder
If the E-mail address to be registered does not match the E-mail address
of the certificate, the certificate cannot be registered. Confirm whether
both E-mail addresses match, and then register the certificate.
If "FTP" was selected
Item
No.
Name
Index
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port No.
Limiting Access to Desti-
nations
C550
Description
To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for "Search from Reference Allowed
Group" appear.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
Description
Specify the registration number.
Select "Use opening number" or "Direct Input". If "Direct Input" is
selected, type in the number. If "0" is specified, the user box is au-
tomatically registered with the next available number.
Type in the name of the destination (up to 24 characters).
Select the index characters for the destination. To normally display
the destination in the touch panel, check the "Main" check box.
Type in the IP address or host name for the FTP server to be used
for transmitting (up to 63 characters). To type in the host name,
check the "Please check to enter host name." check box. If the ma-
chine is set to use IPv6, an IPv6 address can also be specified.
Type in the destination file path (up to 96 characters).
Type in the user ID (up to 47 characters).
Type in the password (up to 31 characters).
Select either "ON" or "OFF"
Select either "ON" or "OFF".
Select either "ON" or "OFF".
Type in the port number. (Range: 1 to 65535; Default: 21)
To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user who
is logged on, the settings for "Search from Reference Allowed
Group" appear.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is select-
ed, select a level.
2
2-38