Konica Minolta bizhub C550 User Manual page 102

User mode
Item
Compose (Page)
Compose (Header/Footer)
Compose (Stamp)
Stamp Combine Method
Limiting Access to Destina-
tions
If "No Destination" was selected.
Item
No.
Name
Resolution
File Type
File Name
Page Setting
Subject
Text
Simplex/Duplex
C550
Description
Specify whether to pint page numbers.
To specify this item, specify settings for the following.
• Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Selects whether to print a header/footer.
To specify this item, specify the registration number of the
header/footer. To check the registered header/foot, click the
[Confirm Registed Contents] button.
Specify whether to print the stamp.
To specify this item, specify settings for the following.
• Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Con-
tents] button. A registered stamp must first be registered from
the control panel.
Select "Image" or "Text".
To specify the access level of the destination, click the [Display]
button. If an access permission group is specified for the user
who is logged on, the settings for "Search from Reference Al-
lowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the
[Search from List] button, and then select an access permission
group from the list. If "Set direct Reference Allowed Level" is se-
lected, select a level.
Description
Displays the registration number.
Type in the name of the program (up to 24 characters).
Select the resolution.
Select the file format.
Type in the file name (up to 30 characters).
Select how the data is to be saved.
Specify the e-mail subject. If "Not Specified" is selected, the de-
fault subject is used. To check the content of the subject, click
the [Subject List] button.
Specify the e-mail text. If "Not Specified" is selected, the default
text is used. To check the content of the text, click the [Text List]
button.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
2
2-67