Snmp Setting - Konica Minolta bizhub C550 User Manual

Administrator mode

SNMP Setting

Specify the SNMP settings.
Item
SNMP
UDP Port Setting
SNMP v1/v2c Setting
Read Community Name
Write Community Name
C550
Description
Select whether or not SNMP is used. If yes, specify whether to use
SNMP v1/v2 (IP), SNMP v3, and SNMP v1 (IPX).
SNMP v1 (IPX) can be specified only when IPX is enabled.
Default setting: 161
Specify the UDP port number.
Specify settings for using SNMP v1/v2c.
Specify the community name to be used for scanning (up to 15
characters).
Specify the community name to be used for reading and writing (up
to 15 characters).
3
3-101