Konica Minolta bizhub C550 User Manual page 95

User mode
If "Fax" was selected
Item
No.
Name
Destination Information
Resolution
File Type
Simplex/Duplex
Original Type
Separate Scan
Density
Background Removal
Scan Size
Application Setting
Timer TX
Password TX
F-Code
2-Sided Binding Direction
Special Original
Book Scan
Erase
C550
Description
Displays the registration number.
Type in the name of the program (up to 24 characters).
Specify the destination.
Select "Select from Address Book" or "Direct Input". To select
a destination from the address book, click the [Search from List]
button, and then select from the list of address book destina-
tions. An address book destination can also be searched for us-
ing its number or index characters. To check the transmission
destinations, click the [Check Destination] button.
If "Direct Input" is selected, type in the address (up to 38 char-
acters, including only numerals, #, *, T, P and E). Click the [Dis-
play] button beside "Communication Setting", and then select
the communication setting ("V34 Off", "ECM Off", "International
Communication", "Check Destination"). If the optional fax multi
line is installed, the line can be selected.
Select the resolution.
Select the file format.
Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Select the document quality, such as text or photo.
Select either "ON" or "OFF".
Select the density.
Adjust the density of the background.
Select the document size ("Auto", "Standard Size" or "Custom
Size").
If "Standard Size" is selected, select the size and the feed direc-
tion.
If "Custom Size" is selected, specify the height and width.
Click the [Display] button, and then specify settings for the func-
tions that are displayed.
Select whether or not to enable timer transmission. If "ON" is
selected, specify the time.
Select whether or not to enable password transmission. If "ON"
is selected, specify the password.
Select whether or not to enable F-codes. If "Enable" is selected,
type in the SUB address and password.
Select the position of the document binding margin.
Select "Normal", "Mixed Original", "Z-Folded Original" or "Long
Original" as the setting for the loaded document.
Specify whether to perform book scan.
To specify this item, select settings for the scanning method
and center erasing. If any setting other than "Book Spread" is
selected for the scanning method, select the binding direction.
Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides
of the document ("Top", "Bottom", "Left" and "Right").
2
2-60