Canon MF3240 - ImageCLASS B/W Laser Software Manual page 62

Introduction
1
Printing
2
Scanning a
Document
3
PC Faxing
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
[Objective] Selects the best setting for the print job
according to document content.
[Details] Click this button to open the [Detailed
Settings] dialog box and make print quality
settings. (See "Detailed Settings," on
p. 2-45.)
[Manual Grayscale Enables the manual grayscale. Selecting this
Settings] check box enables [Grayscale Settings] to
access the dialog box which allows you to
set the grayscale for images. (See
"Grayscale Settings," on p. 2-46.)
[Print Grayscale Prints nine thumbnails per sheet to provide
Sample] the print samples with the current grayscale
settings when printing the document.
NOTE
This option is enabled only when [Manual Grayscale Settings] is
selected.
Back Previous
[Grayscale Click this button after selecting the [Manual
Settings] Grayscale Settings] check box to manually
adjust the grayscale settings. The [Grayscale
Settings] dialog box allows you to specify
Brightness, Contrast, and Matching Mode.
(See "Grayscale Settings," on p. 2-46.)
NOTE
This option is enabled only when [Manual Grayscale Settings] is
selected.
[View Settings] Click this button to display the [View
Settings] dialog box. This dialog box allows
you to view and confirm all of the current
page settings in a listed form. (See "View
Settings," on p. 2-53.)
[About] Displays the version information on the
driver.
[Restore Defaults] Resets all the current settings to their default
values.
TOP
Next
2-44