Canon MF3240 - ImageCLASS B/W Laser Software Manual page 118

Introduction
1
Printing
2
Scanning a
Document
3
PC Faxing
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
[Color Matching]:
Select to automatically match the scanner,
monitor and color printer colors. If selected,
the Color Settings buttons are invalid in the
[Advanced Mode] tab sheet. This setting is
available when [Color] or [Color
(Documents)] is selected in [Color Mode].
[None]:
No color matching is made. This setting is
available when [Color], [Color (Documents)],
or [Grayscale] is selected in [Color Mode].
[Always Execute If selected, the image color will always be
the Auto Tone] automatically corrected. This setting is
available when [Color], [Color (Documents)],
or [Grayscale] is selected in [Color Mode].
[Monitor Gamma] Enables you to perform gamma correction.
Specify the gamma value (0.10 to 10.00) of
the monitor for viewing the scanned image.
NOTE
[Monitor Gamma] value will be fixed to 1.80 when [Color
Matching] is selected in [Color Correction].
Back Previous
● [Scanner] Tab
[Select Folder Click [Browse] and specify the folder in
Where Temporary which the temporary files are saved.
Files are Saved]
TOP
Next
3-37