Canon MF3240 - ImageCLASS B/W Laser Software Manual page 203

Introduction
1
Driver Problems
Printing
2
Driver is not working properly.
Scanning a
Document
3
PC Faxing
4
Troubleshooting
Cannot print some fonts in a document correctly.
5
Appendix
6
Cannot print with a printer driver other than the MF3200 Series
printer.
Table of Contents
Index
Q Is the printer driver selected as the default
printer driver?
A Specify the corresponding printer driver as the
default printer driver for the MF3200 Series.
Q Does the document contain Adobe Type
Manager (ATM) fonts?
A ATM is not supported. Replace ATM fonts to other
appropriate fonts.
Q Is the printer driver connected to the same port
as the MF3200 Series printer driver?
A Connect the printer driver to a port different from
the MF3200 Series printer driver.
Back
Cannot install the MF3200 Series printer driver using the USB
port.
Q Is the USB driver installed properly?
A Perform the following steps.
1. Make sure the machine is connected to your
computer using a USB cable and the machine is
turned on.
Windows Vista/7:
2. Click [Start] on the Windows task bar
[Control Panel]
→
Under [Device Manager], click [View
hardware and devices]. (Windows 7: Click [Start]
on the Windows task bar
→
Panel] [Hardware and Sound]
Manager] under the [Devices and Printers].)
3. Double-click [Universal Serial Bus controllers].
4. Under [Universal Serial Bus controllers], select
the USB class driver. Delete ONLY the USB
class driver specified for your operating system.
Select [USB Printing Support]
[Action] menu, select [Uninstall].
5. Close the [Control Panel] folder
USB cable.
6. Restart your computer.
7. Install the printer driver.
TOP
Previous Next
→
select
→
[System and Maintenance]
→
select [Control
→
[Device
→
From the
→
unplug the
5-5