Canon MF3240 - ImageCLASS B/W Laser Software Manual page 208

Introduction
1
Computer has hung up or frozen.
Printing
2
Scanning a
Document
3
PC Faxing
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Q Is enough memory loaded in your computer?
A Quit other opened applications and try again.
Q Is enough space available in the hard disk?
A Check that the hard disk has enough available
space, in particular when scanning large
documents at a high resolution. For example, a
LTR-size document scanned at 600 dpi, full color
requires a minimum of 300 MB of disk space.
Q Does an error occur when scanning an image in
Photoshop?
A Change the allocated memory. From the [Edit]
menu, select [Preferences] → click [Memory &
Image Cache]. Change the [Physical Memory
Usage] or [Memory Usage] in a range of
approximately 10% to 20%.
Back
Q Is the driver installed properly?
A Remove the software (see "Uninstalling and
Reinstalling the Software," on p. 1-5), then reinstall
it (see "Installing Software," in the Starter Guide).
You installed the applications in the CD-ROM supplied with the
machine but they are not registered in the MF Toolbox.
Q Have you installed the applications with the MF
Toolbox open?
A If you install the applications with the MF Toolbox
open, the applications will not be registered in the
MF Toolbox. Click a button on the MF Toolbox
dialog box and click [Set] to register the application
manually. (See "External Program (Mail Program),"
on p. 3-12.)
TOP
Previous Next
5-10