Canon MF3240 - ImageCLASS B/W Laser Software Manual page 60

Introduction
1
Printing
2
Scanning a
Document
3
PC Faxing
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Finishing Tab
Specifies the finishing settings for the printed pages including
the collating and binding.
For information on [Profile] and [Output Method], see "Profiles,"
on p. 2-48.
Preview image Displays the image with the currently
selected settings reflected. For details on
preview image, see "Preview image," on
p. 2-49.
Back Previous
[Binding Location] Selects a binding location for the printed
pages.
[Gutter] Click this button to set the gutter width for
binding a printed document. (See "Gutter
Settings," on p. 2-43.)
[Finishing] Select the Collate option to print a document
in correct binding order. For example, when
printing multiple copies of a 3-page
document, the print order is 1, 2, 3, 1, 2, 3,
and so on ([Off] or [Collate]).
NOTE
If you select [Collate] in [Finishing], the image on the left bottom
of the preview image will change.
[Advanced Click this button to display [Advanced
Settings] Settings] dialog box for specifying the
finishing details. (See "Advanced Settings,"
on p. 2-43.)
[Restore Defaults] Resets all the current settings to their default
values.
[View Settings] Click this button to display the [View
Settings] dialog box. This dialog box allows
you to view and confirm all of the current
page settings in a listed form. (See "View
Settings," on p. 2-53.)
TOP
Next
2-42