Canon MF3240 - ImageCLASS B/W Laser Software Manual page 209

Introduction
1
When you click a button on the MF Toolbox, another application
opens.
Printing
2
Scanning a
Document
3
PC Faxing
4
Changed settings in a dialog box are not activated (Windows
2000).
Troubleshooting
5
Appendix
6
Table of Contents
Index
Q Is the application selected correctly for that
button?
A Click a button on the MF Toolbox and select the
application you want to open for that button. (See
"External Program (Mail Program)," on p. 3-12.)
Q Did you restart your computer after changing
the settings?
A If you open [Scanners and Cameras] in the [Control
Panel] folder and change the settings in the
[Events] tab, the settings will not be activated
unless you restart your computer. Once you have
changed your settings, restart your computer.
Back
Scanned images look dirty.
Q Is the platen glass or the platen glass cover
clean?
A Clean the platen glass or the platen glass cover.
Q Is the image size too small?
A Some applications do not display an image
properly at small sizes. Try displaying the image at
100% magnification.
Q Does the monitor display color set at below 16
bits?
A In [Display Properties], set the display colors to 16-
bit color, 24-bit color or higher.
TOP
Previous Next
5-11