Canon MF3240 - ImageCLASS B/W Laser Software Manual page 204

Introduction
1
Printing
2
Scanning a
Document
3
PC Faxing
4
Troubleshooting
5
Appendix
6
Table of Contents
Index
Windows 98/Me/2000/XP:
2. Click [Performance and Maintenance] in the
→
[Control Panel] folder [See basic information
about your computer] in the [Performance and
Maintenance] folder (Windows 98/Me/2000:
double-click [System] in the [Control Panel]
folder). The [System Properties] dialog box
appears.
→
3. Select the [Hardware] tab click [Device
→
Manager] double-click [Universal Serial Bus
controllers] (Windows 98/Me: select the [Device
→
Manager] tab double-click [Universal Serial
Bus controllers]).
4. Locate the USB class driver under [Universal
Serial Bus controllers]. Delete ONLY the USB
class driver specified for your operating system.
(If the USB class driver is displayed under [Other
device], delete ONLY one of the following,
depending on your operating system: [USB
Printing Support], [Canon MF3200 Series], or
[Unknown].)
→
Select [USB Printing Support]
[Uninstall] from the [Action] menu (Windows 98/
Me: select [Canon MF3200 Series]
[Remove]).
→
5. Close the [Control Panel] folder
USB cable.
6. Restart your computer.
7. For instructions on installing the printer driver,
see "Installing Software," in the Starter Guide.
Strings of garbled characters are printed.
Q
A
select
→
click
unplug the
Back Previous Next
Is the driver installed properly?
Check if the corresponding printer driver icon is
displayed in the [Printers and Faxes] (Windows 98/
Me/2000/Vista: [Printers], Windows 7: [Devices
and Printers]) folder. If not, install the driver. If the
corresponding printer driver icon is displayed, right
click the corresponding printer driver icon
if [Set as Default Printer] (Windows 98/Me: [Set as
Default]) is selected in the pop-up menu. For more
information, see "Checking Installation," on p. 1-4.
TOP
→
check
5-6