Table of Contents
Advertisement
Access control (Child Lock)
1
Insert a disc. The access control box will appear after a short delay.
2
Using A or B select '
3
Enter your PIN code using the number buttons 0..9 .
Double-sided DVDs may have a different ID for each side. For these discs, each side must be
authorised. Multi-volume video CDs may have a different ID for each volume. For these CDs,
each volume must be authorised.
To lock a disc that was formerly authorised follow the instructions below
1
Insert a disc. Playback starts automatically. If the playback does not
start automatically, press PLAY/PAUSE G9 .
2
Press the STOP h button while the '
changes to '
'. The disc is now locked.
Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some
discs may contain 'Parental Control' rating information that applies to the entire disc or to
certain scenes on the disc.
The appropriate scenes have filter values that reach from 1-8. If such a scene is detected during
playback, the filter value set on the DVD recorder is compared to the scene. If the filter value is
higher than the setting, an alternative scene will be played (if available).
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON .
3
Press SYSTEM-MENU . The menu bar appears
4
' icon using D or C .
Select the '
5
' using B or A and confirm with C .
Select '
' or '
'.
' icon is visible. The icon
Advertisement
Table of Contents
