Table of Contents
Advertisement
Programming a recording (TIMER)
0
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, 's' will light up on the display.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press TIMER on the remote control.
The programming method last selected is marked.
3
Select '
The current information will appear on the screen.
4
Select the input field with D or C .
5
Enter information with B or A or with the number buttons 0..9 .
In '
' use SELECT to select from the following options:
: Repeated daily recordings from Monday to Friday
: Repeated weekly recordings (every week on the same day, e.g. Monday).
You can also programme recordings from external sources via scart socket
EXT 1 TO TV-I/O ('
' input field using TIMER . Using SELECT switch on
Select the '
'VPS/PDC' (' ' lights up). If you press SELECT again, you will switch
'VPS/PDC' off (' ' disappears).
Select the '
' input field using TIMER .
Using SELECT , select the recording mode'
6
If all the information is correct, press OK . The programming
information is stored in a TIMER block.
7
To end, press TIMER .
8
Load a DVD (unprotected) ready for recording.
The disc is checked.
9
Switch off with STANDBY m .
The programmed recording will only function properly if the DVD
recorder has been
If any of the TIMER blocks are in use, 's' will light up on the display.
using the STANDBY m button.
' with B or A . and confirm with C .
') or EXT 2 AUX I/O ('
').
,
,
,
using the STANDBY m button.
,
,
'.
Advertisement
Table of Contents
