Table of Contents
Advertisement
a
b Check the connectors at both ends of the scart cable.
b Check your TV's operating instructions to see which scart socket is used
for video signals.
b If the problem persists, you won't be able to use this feature.
Please read 'Sorting and clearing TV channels manually'.
0
Wait until for example '
A
Select the next programme number
B
Confirm with OK on the DVD recorder remote control.
You can delete incorrect TV channel sorting by pressing D .
C
0
Repeat steps
À
To end, press SYSTEM-MENU .
During installation, all available TV channels are searched for and stored. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the DVD
recorder, e.g. after moving house, you can start this procedure again. This will replace the stored
TV channels with the new ones.
With Easylink, you can search for and store TV channels only on the TV set.
These settings are accepted by the DVD recorder. Use this function to start
the transfer of TV channels from the TV set.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON .
3
Press the SYSTEM-MENU button on the remote control. The menu
bar will appear at the top of the screen.
4
' using D or C .
Select '
5
Select line '
' appears in the display.
B
to
until you have assigned all the TV channels.
' using B or A and confirm with C .
Installing your DVD recorder
, e.g. '2'.
Advertisement
Table of Contents
