Table of Contents
Advertisement
6
Select '
7
', select the desired display using C
In '
: Display/entry of frequencies
: Display/entry of channels
: Display/entry of special channels
TV signals are transmitted in certain pre-defined frequency ranges. These
ranges are divided into channels. A specific frequency/channel is assigned to
each TV station. Certain frequency ranges are specified as special channels
(hyperband channels).
8
In '
', enter the frequency or channel of the TV station
using the number buttons 0..9 .
a
b In this case, press C to start the automatic search. A changing channel
number/frequency number will appear on the TV screen.
Continue the automatic search until you have found the TV channel you
are looking for.
9
Using D or C in '
number you want to use for the TV channel, e.g. '
1
In '
2
Select the desired symbol position using D or C .
3
Change the symbol at the symbol position with B or A .
4
Select the next symbol position in the same way.
5
Keep pressing C until the cursor disappears.
NICAM is a digital sound transmission system. Using NICAM, you can
transmit either 1 stereo channel or 2 separate mono channels. However, if
reception is poor and the sound distorted you can turn off NICAM.
In '
', select '
To change the automatic process for storing channels (fine tuning), select
'
'.
Using D or C you can try to fine-tune the TV channel manually.
0
Press OK to store the TV channel.
A
To search for other TV channels, begin again at
B
To end, press SYSTEM-MENU .
' using B or A and confirm with C .
', select the programme
', press C .
' using D or C .
8
Installing your DVD recorder
'.
.
Advertisement
Table of Contents
