Table of Contents
Advertisement
Installing your DVD recorder
6
Select line '
7
Press C .
8
'Autoinstall' starts. Wait until all TV channels have been found. This
can take several minutes.
9
When Autoinstall is completed, '
on the TV screen.
0
Date and time have been set and saved.
A
To end, press SYSTEM-MENU .
You can read about how to search for a TV channel manually in section 'Manual TV channel
search'.
After you have performed the automatic channel search you may not agree with the sequence in
which the individual TV channels have been allocated to the programme positions (programme
numbers). You can use this function to rearrange the TV channels already stored or to delete
TV channels you don't want or those with poor reception.
With Easylink, TV channels can only be searched for and saved on the TV set.
These settings are then accepted by the DVD recorder.
That is why you cannot select this function manually.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Turn on the DVD recorder. Press the SYSTEM-MENU button on
the remote control. The menu bar will appear at the top of the
screen.
3
' using D or C .
Select '
4
Select line '
' using B or A .
' using B or A and confirm with C .
' will appear
Advertisement
Table of Contents
