Table of Contents
Advertisement
You can use this feature if you own a satellite receiver that can control other devices via a scart
cable and a programming feature (Timer). For more information, please see the operating
instructions for the satellite receiver.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Press
SYSTEM-MENU on the remote control. The menu bar
appears.
3
' using D or C .
Select '
4
Select line '
5
Select '
6
' with D or C .
Select '
To switch off the feature, select '
7
Confirm with OK .
8
Use a scart cable to connect the scart socket EXT 2 AUX I/O on
the DVD recorder to the corresponding scart socket on the satellite
receiver.
9
Quit using SYSTEM-MENU .
0
Insert a disc that you want to use for recording.
A
Programme the satellite receiver with the required information
(programme number of the TV channel, start time, end time).
If necessary, please see the operating instructions for your satellite
receiver.
B
Switch off the DVD recorder with STANDBY m . 'x' appears in the
display to show the activated feature.
The DVD recorder is now ready to record. The beginning and end of the recording is
controlled via the scart socket EXT 2 AUX I/O .
' using B or A and confirm with C .
' using B or A .
' using C or D .
Manual recording
Advertisement
Table of Contents
