Table of Contents
Advertisement
Installing your DVD recorder
7
Select line '
8
Select line '
9
' with D or C .
Select function '
Select '
' (decoder off) on the TV screen in the line '
0
Confirm with OK .
A
To end, press SYSTEM-MENU .
Your decoder has now been allocated to this TV channel.
When this TV channel is selected, the 'DECODER' symbol will appear in the DVD recorder
display.
In some cases, not all of the available TV channels may have been found and stored during initial
installation. In this case, you will need to search for and store the missing or coded TV channels
manually.
With 'Easy Link', the DVD recorder will automatically download the TV
channels stored on the TV set. This is why some lines have no function. To
store new TV channels, they must first be stored on the TV set. The
information will then be transferred to the DVD recorder automatically.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON .
3
Press
SYSTEM-MENU on the remote control. The menu bar
appears.
4
' using D or C .
Select '
5
' using B or A and confirm with C .
Select '
' using B or A and confirm with C .
' using B or A .
' using C .
Advertisement
Table of Contents
