Table of Contents
Advertisement
MONITOR
in the DVD recorder (TV picture on the TV set) and playback on the
DVD recorder
STANDBY m
interrupt a programmed recording (TIMER)
TV/DVD
to the TV set. This lets you watch the picture from any unit connected
to this scart socket (set-top box', video recorder or satellite receiver)
and at the same time record from another source.
If you have not connected a device to scart socket EXT 2 AUX
I/O you can use this button to switch between TV reception and DVD
recorder.
This, however, functions only if you have connected your TV set to the
DVD recorder using a scart cable (socket EXT 1 TO TV-I/O ) and
your TV set reacts to the switching.
T/C
menu bar
If '
an introductory film will be shown. In this case, this function is not
available.
PLAY MODE
REC. MODE
0..9
DISC-MENU
SYSTEM-MENU
the screen)
SELECT
OK
D C A B
RETURN
works also on some DVD's.
CLEAR
CHANNEL q
: Next programme number
CHANNEL r
PLAY/PAUSE G9
If this button is pressed during playback, the DVD recorder switches to
pause. You will see a still picture.
If this button is pressed during recording, the DVD recorder will also
switch to pause.
: This button lets you switch between the (internal) TV tuner
: To switch set on or off, interrupt menu function,
: Switches the scart socket EXT 2 AUX I/O directly
: Choose the 'T'(Title)/'C'(Chapter) directly from the
' appears in the display, the index menu from a recorded disc or
: Choose between repeat, shuffle play and intro-scan
: To select the maximum possible record time
: 0 - 9
: To show the DVD menu or the index screen
: Call up/cancel the main menu (menu bar at the top of
: Select function/value
: To store or confirm entry
: Left, right, up, down
: Return to previous menu on a video CD (VCD). This function
: To delete last entry or clear programmed recording (TIMER)
: Previous programme number
: Play back a disc.
Advertisement
Table of Contents
