Philips DVDR890A User Manual page 31

If you are connecting a satellite receiver, please read the section on 'Using a
satellite receiver'.
If you are connecting a decoder, you must install it as described in the next
section.
TV channels from a satellite receiver (connected to scart socket EXT 2 AUX I/O ) are received
on the DVD recorder on programme number '
If necessary, use the MONITOR button to switch to the internal tuner.
Then select programme number '
' with CHANNEL r .
'
You should select the TV channels to be received by the satellite receiver directly on the
receiver itself.
Some TV channels send coded TV signals that can only be viewed properly with a purchased or
rented decoder. You can connect such a decoder (descrambler) to your DVD recorder. The
following function automatically activates the connected decoder for the TV channel you want to
watch.
If your TV set supports 'Easy Link' the decoder must be assigned to the
relevant TV channel on the TV set (see the operating instructions for your TV
set). Settings cannot then be made in this menu.
1
Switch on the TV set. If required, select the programme number for
the DVD recorder.
2
Switch on the DVD recorder using STANDBY/ON .
3
Use the CHANNEL q and CHANNEL r buttons on the DVD
recorder or the number buttons 0..9 on the remote control to select
the TV channel for which you want to use the decoder. If necessary,
use the MONITOR button to switch to the internal tuner.
4
Press the SYSTEM-MENU button on the remote control. The menu
bar will appear at the top of the screen.
5
' using D or C .
Select '
6
Select line '
'
' with 0 on the remote control and programme number
' using B or A and confirm with C .
Installing your DVD recorder