Using The System; Understanding The On-Screen Display - Lorex LIVE LW2710 Series Instruction Manual

Using the System

Using the System
By default, the camera included with your system is automatically paired to the wireless
receiver. The camera and receiver will communicate with each other once they are
powered on.

Understanding the on-screen display

With camera 1 properly connected and powered on, the system displays a single channel
full-screen live view of the camera.
NOTE: Power on the cameras before powering on the receiver.
2
1
1 File Name: The name of the file actively being recorded. This file will appear in the file list on
the SD card. The Recording File stamp indicates the hour, minutes, and seconds that the
system started recording.
Hour (24-hour)
10
3
4
160602-2.AVI
Seconds
Camera number
Minute
5 7
6
File extension (.AVI)
8