4 - 18 DS9208 Product Reference Guide
Decoding Illumination (Hand-Held Mode Only)
Parameter # 298
When in hand-held mode, selecting Enable Decoding Illumination causes the digital scanner to flash
illumination to aid decoding. Select Disable Decoding Illumination to prevent the digital scanner from using
decoding illumination.
Enabling illumination usually results in superior images. The effectiveness of the illumination decreases as the
distance to the target increases.
*
Enable Decoding Illumination
Post Decode Illumination
Parameter # 809
This parameter controls illumination after decode. Select
decode. Select
Always On
keep illumination on until timeout.
Always On
(1)
to keep Illumination on after decode so the scanner is ready for next decode, or to
(0)
Disable Decoding Illumination
(0)
to turn off illumination immediately after
Always Off
*Always Off
(1)