Undecoded Scanner Emulation Default Parameters - Motorola LS2208-SR20001R Product Reference Manual

Undecoded Scanner Emulation Default Parameters

Table 10-1 lists the defaults for the undecoded scanner emulation host. To change an option, scan the appropriate
bar code(s) in the Undecoded Scanner Host Parameters section beginning on
NOTE See
miscellaneous default parameters.
Undecoded Scanner Emulation Default Table
Table 10-1
Parameter
Beep Style
Parameter Pass-Through
Convert Newer Code Types
Module Width
Convert All Bar Codes to Code 39
Code 39 Full ASCII Conversion
Transmission Timeout
Ignore Unknown Characters
Leading Margin
Check for Decode LED
1
User selection is required to configure this interface and this is the most common selection.
Appendix A, Standard Default Parameters
Beep on Successful Transmit
Parameter Process and Pass Through
Convert Newer Code Types
20 µs
Do Not Convert to Bar Codes to Code 39
Disable
3 seconds
Ignore Unknown Characters
2 ms
Check for Decode LED
Undecoded Scanner Emulation Interface 10 - 3
page 10-5.
for all user preferences, hosts, symbologies, and
Default Page Number
10-5
10-6
10-7
10-7
10-8
10-8
10-9
10-10
10-11
10-12