12.3 Holder, Pocket Bag and Waistband Clamp
1
2
3
4
74
With this device fullness occuring in the area of the pocket openings
because of darts is securely held and smoothed.
The device consists of the following components:
–
Holder 6
–
Clamping plate 3 for pocket bag pieces
–
Waistband clamp 4
Device with waistband clamp
Device without waistband clamp
Caution Risk of Injury !
Turn the main switch off.
Set the holder and waistband clamp only with the main switch turned
off.
Setting the holder 6
–
Loosen the screw on the clamping piece 2.
–
Set the height of the holder 6.
With the knee switch operated the extended piston rod must press
on the cloth slider plate.
–
Tighten the screw on the clamping piece 2.
–
Loosen the screws on the clamping piece 1.
–
Align the holder 6 toward the back (in direction of the machine
head).
The piston rod should hold the trouser seat clamped, not the
pocket bag lying underneath it.
–
Tighten the screws on the clamping piece 1.
–
Regulate the lowering speed of the holder 6 at throttle valve 5.
The lowering movement should occur quickly, but not with a jerk.
Order no. 0794 001222
Order no. 0794 001245
5
6