Changing The Corner Knives (745-24) - Duerkopp Adler 745-22 Service Instructions Manual

6.4 Changing the Corner Knives (745-24)

1
Blunt corner knives are to be replaced with the knife set in the
accessories pack.
Please find the order numbers for the corner knife sets in Chapter 1 of
these Service Instructions.
Caution Risk of Injury !
Turn the main switch off.
Change the corner knives only with the main switch turned off.
Danger of cuts!
Do not reach into the sharp blades of the corner knives.
4 5
–
Loosen screw 3.
–
Remove corner knife 2.
–
Carefully push the new corner knife 2 between clamping piece 4
and knife holder 5.
Attention!
The angle-ground surface 1 of the corner knife 2 must show to the
outside.
–
Tighten screw 3.
2
3
31