Duerkopp Adler 745-22 Service Instructions Manual page 39

–
–
–
–
–
–
–
–
–
7
10 11 12
Insert gauge 13 with its pegs into the accepting holes 6.
Turn the crank pin 1 so that it catches in the recess in the gauge.
Press the crank pin 1.
The thread lever 5 must be set tight except for a lubrication gap.
Tighten the Allen screws 2 and support screw 3.
Remove gauge 13.
Check the ease of movement of the machine by turning the
handwheel.
Place the needle tie rod with the needle cage on crank pin 1 and
tighten its mounting screw (Attention: left-handed thread!).
Replace the needle bar link and set (see Chapter 11.2.4).
Reattach the head cover 10 and cylinder 11 with swing lever 12.
8
9
13
39