Message Display; Status And Error Messages - Epson ActionLaser 1300 EPL-3000 Service Manual

General Description

1.4.3 Message Display

This printer displays two types of messages on the indicator lights: status and error, and service
call error.

Status and Error Messages

1.4.3.1
If any of the following status and errors conditions occur, they will be displayed on the indicator
lights. The error must be cleared immediately using the measures shown in the following table.
Indicator Light Display
Jam/
Data
Cover
Mode
—
—
F.
—
ON
—
—
—
—
—
1-18
Table 1-9. Status and Enor Messages
Status
Resetting
Paper jam or cover open
Warning
An error follows.
Insufficient Memory
There is not enough memory to
print or download data.
Print Overrun
Engine speed faster than print
image processing.
If the printer has unused
memory, it automatically
recovers.
Image Optimum
The printer uses a lower print
quality.
Paper Size Mismatch
The printing paper size is
different from the paper size
chosen.
The EEPROM cannot memorize
the new settings.
Soft Error/CPU Error
Controller error
Paper empty or feed jam
Measures
—
If paper jams, open the cover
and remove the jammed paper.
Then close the cover.
Press the Status Sheet button.
If you need an error statement,
print a status sheet. The status
sheet is the printed error
statement.
Erase downloaded data or add
optional memory.
If the printer cannot
the PAGE PROTECT setting by
with the PJL mmmand (utility
software).
Erase downloaded data or add
optional memory.
Change the paper and print
again.
Try again
then press the Status Sheet
button.
Rev. A