Figure 2-25 shows the print process, and Figure 2-26 shows the start print sequence. The printer's
engine starts printing when the PRINT signal is received from the video controller board.
Laser
Laser
Exposure
Development
Image
Transfer
Paper Take-up
Solenoid
Figure 2-27 shows the end of the print sequence. The printer stops the main motor (Ml) from
rotating when the paper exit sensor turns off after
Drum
Charge
Laser
Exposure
Image
Paper Take-up
Solenoid
Rev. A
Brush Charging \
Exposure
Development
Figure 2-25. Print Process
Print
Main Motor On
Figure 2-26. Print Sequence (Start)
Print
:
Figure 2-27. Print Sequence (End)
PC Drum
Transfer
seconds.
4.72
Operating Principles
[sec.]
[sec.]
2-17