3.1.4 Service Checks after Repair
Check the repaired unit using the following list on completion of servicing.
Item
Location
Control panel
Heater lamp
Operation
Test status sheet
Adjustment
Print position
ROM version
Cleaning
Packing
Rev. A
Table 3-4. Checks after Repair
Does the heater lamp turn ON normally?
Is the status sheet print performed normally?
the
Is
gap between the top edge of the paper and
the horizontal line in the feature print exactly 14.6
mm (0.57 inch)?
Is it the latest version?
Is toner and dust removed from the paper path?
Is the paper take up roller cleaned?
Is the roller in the fusing unit cleaned?
Is the outer surface of the printer clean?
Is the imaging cartridge removed from the printer?
Is the unit packed securely?
Are accessories packed also?
Disassembly and Assembly
Check Point
,