General Information; Toois - Epson ActionLaser 1300 EPL-3000 Service Manual

3.1 GENERAL INFORMATION

This chapter describes the disassembly/assembly procedures to be used for replacing the main
assemblies of the EPL-3000 and ActionLaser 1300.
3.1.1 Precautions for Disassembly/Assembly
Follow the precautions below when disassembling/assembling the printer.
Disconnect the power cord before disassemblylassembly.
Be sure to handle the fising unit carejidly, because the unit is still hot for awhile afler
the printer stops printing.
If it is necessay to plug in the power cord and operate the printer afier disassembling
it, please be carefid of the following:
rollers, fan motors, etc.).
the high-voltage unit).
If the imaging cartridge is removedfiom the printer, do not place it in the direct
sunlight.
To prevent damage to ICsfrom static electricity, do not touch the ICS on the circuit
board or the terminals of peripheral electrical components with your hands.
Inappropriate tools may damage the machine.
Never open the upper unit until the main motor stops completely. Othenoise, the gears
may be damaged.
When transporting the printer, remove the imaging cartridgefiom the printer.
When transporting the printer a long distance, box the printer using the original packing
material.
3.1.2
Use the tools listed in Table 3-1 for disassernbly/assembly and troubleshooting.
Name
Phillips screwdriver No. 2
Regular screwdriver
Tweezers
Soldering iron
Round-nose pliers
Rev. A
Table 3-1. Tools
Commercially Available?
Yes
Yes
Yes
Yes
Yes
Disassembly and Assembly
Part No.
B743800200
B743OOO1OO
B841 000100
B740200100
6740400100