Printhead Removal - Epson LX-300 Service Manual

EPSON LX-300+

4.2.1 Printhead Removal

1. Remove the cover and the printer.
2. Remove 1 screw (CPB, 3x14) securing the printhead to the carriage
assembly.
3. Lift the printhead a little bit. Unlatch 2 hooks securing the printhead FFC
to carriage unit.
4. Remove FFC from the printhead.
Check if the printer is powered off before removing the
printhead.
When the printhead is replaced, perform the platen gap
adjustment.
Disassembly and Assembly
Carriage Assembly
Disassembly and Assembly
CPB (3x14)
Figure4-1. Printhead Removal
Revision A
Printhead
FFC
68