Epson LX-300 Manual

Roman
Sans Serif
D r a f t
Draft Condensed
Micro Adjust
3ULQWHUý6SHFLILFDWLRQVý
Printing
Printing method: 9-pin dot matrix
Print speed:
3ULQWLQJýPRGH &KDUDFWHUýVL]HV
'UDIW ìíýFSL
'UDIW ìëýFSL
'UDIWýFRQGHQVHG ìæïìýFSL
'UDIWýFRQGHQVHG ëíýFSL
'UDIWýHPSKDVL]HG ìíýFSL
'UDIWýGRXEOHýZLGWK èýFSL
1/4 ìíýFSL
1/4 ìëýFSL
1/4ýGRXEOHýZLGWK èýFSL
FSLãýFKDUDFWHUVýSHUýLQFKýýýýýýýýýýýFSVãýFKDUDFWHUVýSHUýVHFRQG
Resolution:
+RUL]RQWDO
3ULQWLQJýPRGH GHQVLW\
'UDIW ìëíýGSL
'UDIWýFRQGHQVHG ëéíýGSL
'UDIWýHPSKDVL]HG ìëíýGSL
1/4 ëéíýGSL
%LWýLPDJH çíýGSL
%LWýLPDJH æëýGSL
%LWýLPDJH åíýGSL
%LWýLPDJH äíýGSL
%LWýLPDJH ìëíýGSL
%LWýLPDJH ìëíýGSL
%LWýLPDJH ëéíýGSL
Printing Bidirectional with logic-seeking for draft
direction: with monochrome ribbon. Unidirectional
for NLQ text, bit image, and color printing.
,QNý-HWý3ULQWHUV
Font LF/FF
1 2
Paper Park
3sec
0D[LPXPýSULQWLQJýVSHHG
ëëíýFSV
ëçéýFSV
ìååýFSV
ëëíýFSV
ììíýFSV
ììíýFSV
ééýFSV
èêýFSV
ëëýFSV
9HUWLFDOý $GMDFHQWý
GHQVLW\ GRWVýSULQW
æëýGSL 1Rý
æëýGSL 1R
æëýGSL <HV
ìééýGSL 1R
æëýGSL <HV
æëýGSL <HV
æëýGSL <HV
æëýGSL <HV
æëýGSL <HV
æëýGSL 1R
æëýGSL 1R
Line spacing:
Paper feed speed: 79 milliseconds per 1/6-inch line
Buffer:
Internal fonts and character tables
Bitmap fonts:
Character tables: 1 italic and 8 graphics character tables
Character sets:
Pause
Paper
Single sheets (CSF):
Width
Length
Thickness
Weight
Quality
Single sheets (manual insertion):
Width
Length
Thickness
Weight
Quality
Note:
Use 90 g/m
conditions only.
Continuous paper:
Width
Copies
Thickness
Weight
Use only two- or three-part carbonless multi-part
forms fed with the tractor.
When using side-crimped multi-part forms, raise the
paper guide to keep the printing position accurate.
When using the push tractor, the printing position for
the last page may not be accurate because the page
comes off the tractor.
éîëëîäé
1/6 inch, 1/8 inch, or programmable in
1/216-inch increments
2.78 inches/sec. for continuous paper
Approximately 4 KB
EPSON NLQ Roman
EPSON NLQ Sans Serif
EPSON Draft
Draft condensed
13 international character sets
210 mm (8.5 inches)
297 mm (11.0 inches)
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
2
64 to 90 g/m (18 to 24 lb)
Bond paper, plain paper, recycled paper
182 to 257 mm (7.2 to 10.1 inches)
182 to 364 mm (7.2 to 14.3 inches)
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
2
52 to 90 g/m (14 to 24 lb)
Bond paper, plain paper, recycled paper
2
paper under normal temperature and humidity
102 to 254 mm (4 to 10 inches)
Three sheets (one original plus two copies)
0.065 to 0.25 mm (0.0025 to 0.0098 inches)
total
2
52.3 to 82 g/m (14 to 22 lb) for one sheet
2
40 to 58.2 g/m (12 to 15 lb) per sheet in
multi-part forms
(3621ý/;ðêíí
(3621ý/;ðêííðì