Disassembly And Assembly - Epson LX-300 Service Manual

EPSON LX-300+

4.2 Disassembly and Assembly

This section explains the disassembly and assembly of LX-300+. Unless
otherwise specified, assembly can be done in the reverse order of the
disassembly procedure.
Anything that service person should pay attention to is described under
"Check Point". Any adjustment required after assembly is described under
"Adjustment".
When you have to remove parts that are not described in this chapter, refer to
the exploded diagram on Appendix of this manual.
Read 4.1.1 "Precautions" before start disassembling the
printer.
Remove ink ribbon and paper before disassembling the
printer.
Disassembly and Assembly
The figure below is the disassembly flowchart for main component.
4.2.2 "Upper Housing
Mechanism Removal"
4.2.5 "C294MAIN Board
Assembly Removal"
Flowchart 4-1. Disassembly Flowchart (Main Component)
Disassembly and Assembly
START
4.2.1 "Printhead
Removal"
4.2.3 "Printer
4.2.4 "Board Assembly
and Panel Removal"
4.2.6 "P/S Board
Assembly Removal"
Revision A
Removal"
67