Pf Motor Assembly Removal; Paper Feed Mechanism Disassembly - Epson LX-300 Service Manual

EPSON LX-300+

4.2.7.10 PF Motor Assembly Removal

1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism
Removal".)
2. Remove the platen grounding wire from the platen.
3. Remove 1 screw (CBP, 3x10) securing the PF motor assembly to the right
frame.
4. Remove 1 hook at the right frame securing the PF motor assembly to the
right frame and remove the PF motor assembly.
Platen grounding wire
CBP (3x10)
Figure4-20. PF Motor Assembly Removal
When installing the PF motor assembly to the right frame, be
careful to align the position marking pin and motor bracket
position marking hole.
Disassembly and Assembly
PF motor assembly
Position marking pin
Hook at the right frame
Disassembly and Assembly

4.2.7.11 Paper Feed Mechanism Disassembly

1. Remove the printer mechanism. (See 4.2.3 "Printer Mechanism
Removal".)
2. Remove the PF motor assembly. (See 4.2.7.10 "PF Motor Assembly
Removal".)
3. Remove the release lever.
Release shaft
Figure4-21. Release Lever Removal
When installing the release lever, be sure to align the marking
on the release lever with the marking on the release shaft.
4. Release the hook of the right frame securing the gear, 27.5 and remove
the gear, plain washer 5.2x0.3x10 and the compression spring, 1.18.
Revision A
Release lever
79