Epson LX-300 Service Manual page 86

EPSON LX-300+
11. When you select the destination, select menu below appears. You can
select from inspection within the production line (In line) or inspection for
↑
shipment (Out Going). Use and
Going" and press ENTER.
12. On the next screen, you can input the number of printing columns per
one movement of the carriage. As the carriage width of LX-300+ is 80, use
↑ ↓
and key to shift ">" mark to the left of "(1) 80 column" and press
ENTER.
Adjustment
↓
key to shift ">" mark to the left of "Out
13. "Main MENU" appears. Use
to the left of "(1) Bi-D Adjust" and press ENTER.
14. The printing mode select menu for Bi-D adjustment appears. Use
key to select the printing mode and use
setting.
Overview
Revision A
↑ ↓ ← →
and key or and key to shift ">" mark
← →
and key to select Bi-D
↑ ↓
and
86