Initialization - Epson LX-300 Service Manual

LX-300+

1.6 Initialization

Power-on initialization
The initialization of this level is activated by power-on or cold-reset
command (remote RS command).
This initialization is;
to initialize the printer mechanism.
to execute Operator initialization.
Operator initialization
The initialization of this level is activated by -INT signal (negative
pulse).
This initialization is;
to clear the all buffers of data.
to cancel the download character definition.
to make the printer stand-by state, if no errors occur.
to execute Software initialization.
Software initialization
The initialization of this level is activated by the control code ESC@.
This initialization is;
to clear the unprinted data.
to make the printer's setting defaults.
Product Description Initialization
Revision A
35