Function Enhancement On Audio Cd Track Loading; How To Load Tracks From An Audio Cd - Fostex VF160 Supplement Owner's Manual

VF160 Owner's Manual <V2.0 Supplement>

Function enhancement on audio CD track loading

The audio track loading function which is available by installing the optional CD-1A
(CD-R/RW drive) has been enhanced. With the previous version, you can load the
specified track(s) from an audio CD. With version 2.0, you can also load all tracks
from an audio CD at once.
With this function enhancement, the procedure for loading data from an audio CD
described on page 123 in the VF160 manual has been changed.
Please follow the procedure below not only when loading all track at once but also
when loading a single track.

How to load tracks from an audio CD

In the following operation, we assume that the optional CD-1A (CD-R/RW drive) is
installed to the VF160 and an audio CD created by the VF160 (or on the market) is
prepared.
<Important notice on copyright>
Never use a material loaded from an audio CD on the market for a commercial purpose unless
you own the copyright, or have obtained the appropriate permission from the copyright owner
or the rightful licenser. Your unauthorized use for a commercial purpose thereof, may result in
severe civil and criminal penalties under copyright laws and international copyright treaties.
1)
2)
3)
4)
5)
Turn on the VF160 and set an audio CD to the CD-R/RW drive.
Press the [SETUP] key to enter the setup mode.
Rotate the [JOG] dial to select "Load PGM" and press the [ENTER/YES] key.
The display changes to show the screen for selecting the source device of loading, on which
"IDE" flashes.
While "IDE" is flashing, press the [ENTER/YES] key.
The display changes to show the screen for selecting the load mode, on which "CD-DA"
flashes.
flashing
While "CD-DA" is flashing, press the [ENTER/YES] key.
The display now shows the warning message for the copyright. By rotating the [JOG] dial,
you can scroll the message.
flashing
22
flashing
flashing