Editing the chain play list
You can replace a program in the chain play list with another program, delete a
program from the list, or add a new program to the list.
• Deleting (or replacing) a program in the chain play list
You can delete a desired program from the chain play list or replace a program
in the list with another program by following the procedure below.
1)
While the recorder is stopped, press the [SETUP] key to enter the setup mode.
The screen for selecting a menu item in the setup mode appears.
2)
Use the [JOG] dial to select "Chain Play List", and press the [ENTER/YES] key.
The display changes to shows the "Chain Play List" screen as below.
3)
Use the [JOG] dial to select the step you want to edit, and press the [ENTER/YES]
key.
The program number set to the selected step starts flashing.
In the example below, "P03" which is set to step 3 (C03) is flashing.
4)
Use the [JOG] dial to select "DEL" (or a desired program) and press the [ENTER/
YES] key.
To delete the program from the chain play list, select "DEL". To replace the program with
another program, select a desired program.
If you delete the program from the list, all the programs set to the subsequent steps
automatically slide up, as shown below.
If you select a desired program, the program set to the selected step is replaced and other
steps are not affected (in the following example, "P03" set to "C03" is replaced with "P08").
To delete (or replace) another program, repeat the procedure shown above.
5)
Press the [EXIT/NO] key to exit the "Chain Play List" screen.
The display returns to the "Select Menu" screen where the current option of the "Chain
Play" mode setting is flashing.
VF160 Owner's Manual <V2.0 Supplement>
11