Page 1
Model 8340 SCSI card must be installed to the VF08. See page 115 of the main manual for details about how to install the option. For the detailed information about the Model 8340 SCSI card, contact your local Fostex dis- tributor.
<Note> Do not playback a CD-RW/CD-R disc which has been recorded VF08 data by other devices than FOSTEX machines. Otherwise, the drive or system used may be damaged. <About data writing and reading speeds for data save/load> The writing and reading speeds for data save and load of the VF08 are automatically set as below.
<Note> You can save or load data using a CD-RW drive only with the FDMS-3 (Fostex Digital Manage- ment System-3) format. Note that, unlike other SCSI devices, you cannot save or load data with the WAV file format. See the main manual for saving/loading a WAV file.
Page 4
Saving data using a CD-RW drive In the following procedure, we assume that a CD-RW drive is connected to the SCSI port of the Model 8340 installed in the VF08 and a non-recorded CD-RW disc is used. <Note> Do not carry out any VF08 key operation until the access process to the CD-RW disk is completed.
Page 5
<Note for saving data to more than one disc> If you save data to more than one disc, we recom- mend to put a number on each disc in the saving order (such as DISC-1 , DISC-2 , etc.) so that you will easily know the order for inserting discs when load- ing data.
Page 6
<Hint 2> If you try to save data to a recorded CD-R disc, the display shows a warning message saying "Not Writ- able!", followed by a message saying "Insert Disk" as below. Loading data from a CD-RW drive In the following procedure, we assume that a CD-RW drive is connected to the SCSI port of the Model 8340 installed in the VF08 and a non- recorded CD-RW disc is used.
Page 7
<Note> When you load song data which is saved to If there is not enough available space for loading on more than one disc, the display also shows the the current drive, the display shows " Disk Full! " and disc number currently set.