Making The Chain Play List By Selecting All The Programs - Fostex VF160 Supplement Owner's Manual

V2.0 supplement
Hide thumbs Also See for VF160:
Table of Contents

Advertisement

Making the chain play list by selecting all the programs

The following procedure example shows how to enter all the programs (P01
through P10) on the current drive to the chain play list.
1)
While "END" is flashing, rotate the [JOG] dial to select "ALL", and press the [ENTER/
YES] key.
By rotating the [JOG] dial to the left, you can find "ALL" easily.
flashing
By pressing the [ENTER/YES] key after selecting "ALL", all programs on the current drive
are entered to the chain play list, as shown in the screen example below.
flashing
By rotating the [JOG] dial, you can scroll through the list to check the chain
play list. In the last line on the list, "C11: END" is shown, which shows that no
more program is entered after step 11.
2)
Press the [EXIT/NO] key.
The chain play list is made and the "Chain Play List" screen is dismissed.
The display returns to the "Select Menu" screen, where the current option of the "Chain
Play" menu item flashes (by default, "Off" flashes) and you can now set the chain play
mode.
flashing
For details about how to set the chain play mode, see "Setting the chain play
mode" on page 9.
<Note>
If a program which participates in the chain play list is deleted from the drive(see
"Deleting a program" in the owner's manual), the whole play list is cleared (it
returns to show "C01: END").
If you select the "Delete" menu item of the Setup mode and press the [ENTER/YES]
key, the display shows the warning message ("[ WARNING] Delete Play List too?").
flashing
flashing
7
VF160 Owner's Manual <V2.0 Supplement>
flashing
flashing

Advertisement

Table of Contents
loading

Table of Contents