VF160 Owner's Manual <V2.0 Supplement>
How to edit the clipboard out point
The following procedure describes how to edit the clipboard out point, assuming
that a program mastered by the internal mixdown mode is currently loaded.
1)
While the VF160 is stopped, press the [CLIPBOARD OUT] key.
The display shows the current Clipboard Out point data in which "s" (second) flashes.
2)
You can move the flashing point (edit point) using the [REWIND] or [F FWD] key,
while you can edit the value using the [JOG] dial.
For example, to edit the current value ("00H 03M 00S 00F 00SF") to "00H 03M 05S 00F 00SF",
while "s" flashes, use the [JOG] dial to enter "05".
3)
After making editing, press the [STORE] key.
The display shows "Hit Any Memory Keys!".
Now, hitting any desired memory key will store the data to the associated memory.
4)
Press the [CLIPBOARD OUT] key.
The edited time data is stored to the Clipboard Out point, while the edit mode exits and the
display returns to show the Normal screen.
flashing
16
flashing
flashing
flashing