Fostex VF160 Supplement Owner's Manual page 24

VF160 Owner's Manual <V2.0 Supplement>
8)
9)
10)
<Hint>
Before executing "All" track loading, you can delete an unnecessary track by
the following procedure.
1) While the display shows the screen as above, use the [JOG] dial to highlight the
desired track and press the [ENTER/YES] key.
The destination program number of the selected track starts flashing.
2) Use the [JOG] dial to select "NON" and press the [ENTER/ YES] key.
A track whose destination program number is set to "NON" is not loaded.
Use the [JOG] dial to select (highlight) a desired track to be loaded and press the
[ENTER/YES] key.
The load destination program number of the selected track is shown as a flashing display,
as well as the track time. In the screen example below, track 1 (01) is selected.
The total time is also shown above the track list. (The total time is summed up each time
you select another track.)
In this condition, you can choose the option between "Pxx" (program number) and "NON"
using the [JOG] dial. To cancel the track selection, choose "NON" and press the [ENTER/
YES] key. To set the track to be loaded, go to the next step.
Press the [ENTER/YES] key.
The selected track ("01", in this example) is set, while the screen changes as below.
Use the [JOG] dial to select (highlight) another desired track to be loaded and
press the [ENTER/YES] key.
In the example below, track 2 (02) is selected (of course, you can select whichever track you
want). Depending on the load type ("One" or "Select") selected in step 7) above, the screen
shown is slightly different.
When you set the load type to "One", the load destination program number for the secondly
selected track is one higher than that for the firstly selected track. That is, the load destination
program number is counted up each time you select a track.
<When the load type is "One".>
<When the load type is "Select".>
24