Fostex VF160 Supplement Owner's Manual page 26

VF160 Owner's Manual <V2.0 Supplement>
<Hint>
To play back a desired loaded track on the current drive, carry out the following
operation depending on the load type.
• To play back a track loaded with the type set to "One":
1. Select the appropriate program to which the track to be played back is loaded
by following the procedure below.
See "Selecting a program" on page 70 of the owner's manual for
details about how to select a program.
1-1. Press the [PGM SEL] key.
1-2. Use the [JOG] dial to highlight the appropriate program.
1-3. Press the [ENTER/YES] key.
2. Press the [PLAY] key to start playback of the track.
• To play back tracks loaded with the type set to "Select" or "All":
1. Select the destination program by following the same procedure as step 1
above.
2. Select a desired track in the program by pressing the [REWIND/PREV] or
[F FWD/NEXT] keys while holding down the [SHIFT] key when the recorder
is stopped or during playback.
Because all the tracks loaded take part in the same program, you
have to select a track within the program.
The VF160 automatically set an event at the beginning of each track
loaded with the type set to "Select" or "All", so pressing [REWIND/
PREV] or [F FWD/NEXT] key while holding down the [SHIFT] key
locates to the beginning of the previous or next track, as with a typical
CD player on the market (see "Event function" on page 36 of the
owner's manual).
3. Press the [PLAY] key to start playback of the track.
To check events, press the [SCENE STORE/MAP] key while holding down the
[SHIFT] key while the recorder is stopped. The display shows the event map,
allowing you to check the event positions (in the screen example below, the
time base is set to "Bar/Beat/Clk").
flashing
26