[ 5 ] Removing the Sub PCB ASSY, FEED/CUT Button, and ON/OFF Button from the
Front Cover
(1) Take off the sub PCB ASSY from the front cover by removing the two screws.
(2) Lift up the FEED/CUT button together with the key return spring.
(3) Lift up the ON/OFF button together with the key return spring and reflection sheet.
As illustrated below, remove the reflection sheet from the button's guides.
Fig. 2.2-12 Removing the Sub PCB ASSY, FEED/CUT Button, and ON/OFF Button
II - 16