3 ] Installing The Cutter-Related Components - Brother PT-2500PC Service Manual

[ 3 ] Installing the Cutter-related Components

(1) Set the cutter sensor actuator on the mechanical unit as illustrated below.
(2) Secure the cutter sensor ASSY with the screw.
Fig. 2.2-24 Installing the Cutter Sensor Actuator and Cutter Sensor ASSY
(3) As shown below, set the cutter motor ASSY on the mechanical unit with the harness
facing up. While pulling up the motor, secure it with the two screws.
(4) Set the cutter double gears and cutter moving gear in place, then fit the washer in
the cutter moving gear.
Fig. 2.2-25 Installing the Cutter Motor ASSY
II - 25